2018 Land Pride RCR2660

Call for Price

Land Pride



Land Pride's medium-duty RCR26 Series Rotary Cutters are ideal for cutting on gently sloping or slightly contoured rights-of-way, pastures, set aside acres, and row crop fields. Both units feature a single laminated trailing wheel and 4-plate slip clutch protection. The RCR26 Series clears grass, weeds, and light brush up to 3" in diameter and has a cutting height range of 2" to 12". These units come with a standard 3/16” heavy-duty stump jumper and replaceable skid shoes. The stump jumper on the RCR2660 is 24" diameter and the RCR2672 features a 30" round pan. Rubber deflectors or chain guards options are available.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows Land Pride’s confidence in gearbox integrity.
  • 110 HP gearbox: A rugged heavy built gearbox capable of handling heavy cutting applications.
  • Cat. 4 driveline with 4 plate slip-clutch: Excellent gearbox protection with the slip-clutch slipping when encountering obstruction in the blade path. Standard slip-clutch offers convenience over shear-bolts.
  • Cat. l or ll 3-point hitch: Allows use on a wider variety of tractors.
  • Lower clevis type 3-point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Heavy 10 gauge deck construction: Can withstand more abuse than lighter gauge decks.
  • 1/4” Side panels for overall reinforcement: Also protects sides from debris being thrown against them from the blades.
  • Fully welded deck: Robotically welded. Adds additional strength and reduces rust.
  • Extended front tapered deck: Contains and discharges material better.
  • Round back design: Allows for more efficient handling and dispersing of material.
  • 9” Deck Height: Allows cutter to handle heavy cutting conditions.
  • 2” to 12” Cutting height: Provides for a wide range of cutting conditions.
  • High cutting capacity: Can cut brushy areas with saplings up to 3”.
  • Full length skids with replaceable shoes: Full length skids protect side plate structure, replaceable shoes for convenience.
  • 1/2” x 4” Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16” Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
  • High blade tip speed: 60” =12,384 fpm and 72” = 14,861 fpm
  • 3” Dia. cutting capacity: Can aid in clearing brush.
  • Rugged laminated tailwheel: Can’t go flat. Choice of single or dual combination.
  • Chain or rubber shield option: Located on front and rear. Reduces flying debris.
  • Driveline Holder: Keeps driveline up out of dirt. Easier hook up of driveline.
  • Machine Weight (with Chain Guards): 1,002 lb.
  • Hitch: Category l or ll - Quick Hitch Compatible with Floating Top Link, Quick Hitch Ready
  • Cutting Width: 60 in.
  • Overall Width: 67 in.
  • Overall Length (Including Tailwheel): 114 in.
  • Deck Height: 9 1/8 in. (Bottom of Deck to Bottom of Skid Shoe)
  • Cutting Height: 2 in. - 12 in.
  • Cutting Capacity: 3 in.
  • Recommended Tractor HP: 40-130 maximum
  • PTO Speed: 540 rpm
  • Gearbox: 540 rpm PTO Driven Gearbox 1:1.46 Speed-Up Beveled Gears Cast Iron Housing
  • Gearbox Lubrication Capacity & Type: 7 pints of 80-90W EP oil
  • Gear box Input/ Output Shaft Size: Input Shaft = 1 3/8 in. - 6 Spline; Output Shaft = 2 in. Dia.
  • Deck Construction: All welded construction
  • Deck Material Thickness: 10 Gauge
  • Side Panel Thickness: 1/4 in.
  • Skids: Replaceable
  • Stump Jumper: Round Pan 3/16 in. x 24 in.
  • Blades (2): 1/2 in. x 4 in. x 25 in. Heat Treated Alloy Steel Free-Swinging High Lift
  • Blade Bolt: Keyed with harden flat washer and lock nut
  • Blade Tip Speed: 12,384 fpm/788 rpm
  • Driveline: ASAE Category 4
  • Driveline Protection: 4 Plate Slip Clutch
  • Tailwheel Mount Assembly: Welded arm and Caster Fork
  • Tailwheel: 4.00 x 8 x 15 Laminated Tire with cast iron hub and tapered roller bearings
  • Front Guard: Optional: Chain Guard; Available through Parts Department: Rubber Guard
  • Rear Guard: Optional: Chain Guard



Working Width
60 in.
67 in.
114 in.
1,002 lb.
Recommended HP
40-130 hp

Related Products