2018 Land Pride RCF3684 - 3-Point Type

Call for Price

Land Pride
RCF3684 - 3-Point Type



The Land Pride RCF3684 Rotary Cutter is a brute among single-spindle cutters. It features a 190 HP gearbox capable of cutting heavy grass and weeds, row crop stubble, thick brush, and small trees up to 4" in diameter and has a cutting height range of 2" to 12". The RCF3684 features a smooth top design for easy cleaning, and all-welded deck for added strength, and a floating top hitch for a clean, even cut.

  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • 5 Year gearbox warranty: A rugged heavy built gearbox capable of handling heavy cutting applications. Shows Land Pride’s confidence in gearbox integrity.
  • Cat. 5 driveline with 4-plate slip-clutch: Slip-clutch driveline offers convenience for continual work.
  • Cat. II and III 3-Point Hitch Options with Quick Hitch Capability: Fits a wide variety of tractors. Quick Hitch provides for fast hook-up.
  • Dual position clevis type 3-Point floating top link: Permits deck to follow the terrain for an even cut.
  • Lower clevis type 3-Point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Pull-type hitch option: Fits older tractors without a top link and smaller tractors without enough lift capacity.
  • 84" Cutting width: Wide cutting width, reduces cutting time in the field.
  • Heavy deck construction with 3/16" deck top & 1/4" side skirts: Strong heavy deck material for rugged use. Heavy side panels protects sides from debris being thrown against them from the blades.
  • Fully welded deck: Adds additional strength and deck integrity.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 13 3/8" Deck height: Allows cutter to handle heavy cutting conditions.
  • 2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • High cutting capacity: Can cut brushy areas with saplings up to 4".
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • 3/16" Plate stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • High blade tip speed: Ensures clean cut.
  • 4" Dia. cutting capacity: Can aid in clearing brush.
  • Dual laminated tailwheels: Dual tailwheels offer greater stability in uneven terrain. Laminated material is long lasting in rough conditions. Can’t go flat.
  • 1 1/2" Heavy-duty spindle on tailwheel (3-Point cutter): Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
  • Wheel bearings (Pull-type cutter): Tapered roller bearing in cast iron hub.
  • Optional guarding: Protect against flying debris.
  • Machine Weight: 2,000 lbs. with front & rear single chain guards
  • Hitch: Category lI or III with floating clevis top link, Quick Hitch adaptable
  • Cutting Width: 84 in.
  • Overall Width: 90 1/2 in.
  • Overall Length: 130 in.
  • Deck Height (Bottom of Deck to Bottom of Skid Shoe): 13 3/8 in.
  • Cutting Height: 2 in. - 12 in.
  • Cutting Capacity: 4 in. Diameter
  • Recommended Tractor PTO HP: 70-190 HP
  • PTO Speed: 540 rpm
  • Gearbox: 1:1.21 Speed-up beveled gears, Cast iron housing, 1 3/4 in.-20 spline input shaft and 2 3/8 in. output shaft
  • Gearbox Lubricant: 80-90W oil
  • Gearbox oil Capacity: 10 pints
  • Deck Construction: All welded deck
  • Deck Material Thickness: 3/16 in.
  • Side Skirt Material Thickness: 1/4 in.
  • Skid Construction: Replaceable bolt on skid shoes
  • Stump Jumper / Blade Holder: 3/16 in. Round dish shaped bolt-on stump-jumper with diamond shaped blade bar
  • Blades (2): 1/2 in. x 4 in. Heat treated alloy steel free-swinging high lift - low friction
  • Blade Bolts: Keyed with harden flat washers & lock nuts
  • Blade Tip Speed: 14,369 fpm
  • Driveline: ASAE category 5 with 4-plate slip clutch
  • Driveline Protection: 4 plate slip clutch
  • Transport Axle: Cushioned shock absorption
  • Rear Deck Height Adjustment Options: Ratchet Jack or Hydraulic Cylinder
  • Tailwheel: 4 in. x 8 in. x 15 in. Laminated tire with cast iron hub
  • Front Guard: Optional: Rubber belting, single chain guard or double chain guard
  • Rear Guard: Optional: Single chain guard or double chain guard
  • Jack Stand: Jack stand on tongue of pull-type cutter



Working Width
84 in.
90 1/2 in.
130 in.
2000 lb.
Recommended HP
70-190 PTO hp

Related Products