2012 Land Pride RB3596


Stock Image

Stock Image

In Stock
Alex Power Equipment
Primary Color
Paint is faded
Land Pride


Dealer Insights

Faded & Weathered AS IS.


The RB35 Series Rear Blades are ideal for landscaping, construction, snow removal, feedlot cleaning and all-around farm use. A retractable parking stand is included to assist in blade removal, storage, and remount capabilities. Available accessories include a single gauge wheel for depth control, end plates for holding material, and skid shoes for blade protection. The moldboard can be removed to accommodate installation of a landscape rake. Hydraulic cylinders can be added to control the gauge wheel and blade offset (two cylinders are required).

  • Cat. 1 & 2 Hitch: Fits wide variety of tractors.
  • Blade angles left and right up to 60 degrees in either direction: (9 Forward positions in 15 degree increments and 5 reverse positions in 30 degree increments) Many angles for diverse jobs and results.
  • Blade offsets left or right 12”: (7 positions: Center, 3 left and 3 right) Helps extend blade past tractor tire.
  • Blade tilts up and down up to 30 degrees: (5 positions: Center, 2 clockwise and 2 counterclockwise) Allows operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches.
  • Heavy turntable housing (dog house): Keeps all parts fitting snug to eliminate premature wear. Extends life on threaded shaft.
  • 17 1/2” High rolled moldboard: Rolls material for less drag.
  • 5/16” Moldboard thickness: Offers thickness for rugged work.
  • 2” x 2 x 3/8” Angle iron reinforcement on 96” Moldboards: Gives 96” moldboard added strength.
  • 1/2 ” x 6” Heat-treated reversible cutting edge: Gives twice the life from the cutting edge by being able to reverse it.
  • Retractable Parking Stand: Keeps frame off ground during storage, also allows for easy hook-up.
  • Landscape Rake adaptable: Landscape Rake can be added.
  • End plates (optional): End plates allow the blade to hold dirt in to move it.
  • Skid shoes (optional): Set depth of blade to clear obstructions such as manhole covers or street cracks.
  • Gauge wheel (optional): Can be used for more precise grading by keeping the moldboard at a fixed position.
  • Blade Width: 96 in.
  • Approximate Weight: 566 lbs.
  • Horsepower Rating: 35-80 hp
  • Hitch Type: Cat. 1 & 2 - Fits Land Pride Quick Hitch
  • Blade Angle: 9 Forward up to 60 degrees clockwise & counterclockwise, 5 Reverse up to 60 degrees clockwise & counterclockwise
  • Blade Offset: Up to 22 in. left or right (7 positions: Center, 3 left and 3 right)
  • Blade Tilt: 5 Positions (Maximum 30° up and 30° down in 15° increments)
  • Moldboard Height: 17 1/2 in.
  • Moldboard Thickness: 5/16 in.
  • Cutting Edge: 1/2 in. x 6 in. Heat treated Replaceable & Reversible (Double bevel)
  • Parking Stand: Retractable
  • Accessories: Single Gauge Wheel, Skid Shoes End Plates, Hydraulic Cylinder For Single Gauge Wheel, Hydraulic Cylinder For Frame Offset, and Landscape Rake Adaptable



Cutting Width
96 in.
Cutting Edge Height
6 in. Heat treated, Replaceable & Reversible (Double bevel)
Moldboard Height
17 1/2 in.
Blade Angling
9 Forward up to 60 degrees right or left, 5 Reverse up to 60 degrees right or left
566 lb.